The 10th of
April 2007 was quite possibly a landmark in watchmaking history ! Are you
ready to believe me?
While we were
so eager at discovering more about the new Duometre a Chronometre, the real
star of the year at Jaeger-LeCoultre was still about appearing.
The last few
minutes before light seemed probably like an eternity to the team members who
had conceived, developed, constructed, tested, achieved the new Master
Compressor Extreme Lab. That's not so often that you see the men and
women at MJLC being so nervous, so excited, so exhilarated! The traditional
Swiss understatement was gone after two years of intensive development!
Last year we studied together the Master Tourbillon. http://www.tp178.com/wsw/jlcforum/mas_tourb_02.htm
I thought this
watch was achieved but I was far from the truth. On this base of calibre 978
the Extreme LAB team developed calibre 988C.
We know that watches need to be serviced
from time to time. Lubrication is not for ever so our little machines have to
be cleaned and lubricated again so that they can work flawlessly and stand as
perfect chronometers. The absence of liquid lubricants or grease also means
that the watch can stand a larger range of temperatures (-40 to +60 celsius).
What about changing all that and getting rid
of all these oil and greases! A simple idea, just slightly more complicated to
implement. Others have begun to work seriously on that, mainly around the
escapement. Jaeger-LeCoultre itself has already replaced the traditionally
lubricated automatic winding ball bearings with ceramic ball bearings without
lubricant a few years back.
But the real challenge here is to replace
ALL this short lived lubrication by real long term solutions. The parts need to
be worked so that they don't need added lubricant anymore. The extensive use
of high technology materials has allowed this achievement.
The principles of horology have not been
changed, but extreme efficiency is again further enhanced.
The first improvement is the use of high
tech materials, such as Easium™ carbonitride for making bearings, these
bearings receiving the Molybdenum Disulfide (MOS2) coated steel pivots for instance
for the balance staff without the need for any jewel.
The traditional
red color of the pallet stones has also disappeared, being replaced by the formal
elegance of some black crystalline diamonds, chosen for their efficiency much
superior to "real" diamonds. No lubricant overthere anymore either!
To some extent I guess that we could say that the "lubricant", if I
may still use this word, is build with and inside each part in itself, kind of
"auto-lubrication".
The tourbillon carriage
is machined from blocks of a magnesium alloy. It is two and a half times
lighter than titanium, helping to decrease losses due to friction.
The main barrel
is also freed from any need for grease through the use of graphite powder. Graphite
powder helps the bride to slide smoothly inside the drum when the mainspring
has been wound beyond maximum power reserve by the automatic winding mechanism.
Isochronism of
the balance spring has been optimized with a Phillips terminal curve and the
creation of a "bend" in the center of the spring. This bend is "a
distortion of the balance spring at a specific place, close to the collet
pinning-point, and which at given moments modifies the rigidity of the spring
and corrects the tendency of any spring to breathe in an off-centred manner".
The balance, no longer a wheel, has been re-designed to decrease the mechanical friction with the air, through reducing the surface of the arms. JLC research has concluded that a large surface of balance decreases its aerodynamic performances and increases the need for energy to maintain the oscillations. The new balance has been built in iridium platinum, the densest non-toxic physical body currently available, thus allowing for keeping the 11.5 mg x cm² inertia with a minimum aerodynamic loss of energy. The design of the balance arm has been carefully worked to decrease the mass/inertia ratio, allowing a more constant rate no matter the position, and consequently a more precise adjustment of the watch.
Adjustment is
made using screws placed on the balance, like on all JLC automatic calibres now.
Cadence is regulated to 28800 vibrations per hour.
The watch is really
a Compressor series design, bringing to a further step the work initiated by Magali
Metrailler a few years back. This design is definitely not for everybody, but I
find it very consistent with the exceptional technical content and very
pleasing to my taste.
Bridges are
made of aluminium alloys, the center bridge being made of Ticalium®, aluminium
reinforced with particles of titanium carbide. Hardness and resistance are
improved by 20% without increasing the density.
The case
construction reflects the movement with the association of carbon (central part
of case), silicon carbonitride (bezel) and grade 5 titanium (top and back of
case). Three patents have been filed for this case: 1°) the original structure
with an interior carbon fibre case fitted inside a titanium ring, 2°) the
suspension mounting of the movement on a silent block made from a supple red polyurethane
material, 3°) the notched adjustment of the strap fastening to ensure a perfect
fit around the curve of the wrist.
This automatic
tourbillon watch gets two time zones with an AM/PM pointer indication at noon
and a jumping date display.
The red touch
is the combination of the red supple polyurethane silent block, the red hands, the
red eloxed aluminium crown, and the red alcantara inside the leather on cordura
canvas strap.
The rotor has
been opimized with carbon fiber arms and a lighter and more rigid base. The
oscillating weight is made in iridium platinum like the balance. The entire
winding/time setting
mechanism is coated with nickel/PTFE to do without liquid lubricant.
So this
extraordinary watch is definitely a world premiere, letting us hope for soon to
come implementations of its technical advances in the affordable range of
watches from Jaeger-LeCoultre. The rotor and balance may be the first subjects
of implementation. For the happy few who can't wait but can afford, a
small series will be produced and sold to the final customers, a la Ferrari FXX
if I may say. If you're about treating yourself with a racing machine,
you may want to have a closer look.
On top of a
technical success, this watch is a testimony to the Manufacture innovation spirit.
The Extreme LAB team be justly and rightfully proud of their first baby, they
may just write the first page of the future of Jaeger-LeCoultre.
Dje